M600 SPECIFICATION DATA:
● ReFleX™ UV reaction chamber for increased UV dosage efficiency
● 100% Dosage Assurance™ - UV intensity monitoring system
● 846 to 935 CADR (m3/hr) for 600 to 900 cubic feet per minute air handling capacity
● SARS-COV-2 Inactivation per pass through unit, effective against broad range of airborne pathogens.
● UV-C 254nm ultraviolet lamp produces ASHRAE dose requirements for 3-log inactivation
● One MERV-8 inlet and two MERV-13 discharge filters provide secondary purification
● 54 dB while in 600 CFM operation
● Lamp and filter status LED light
● NSF-Listed sanitary plate casters
● Operates on 120v 1phase power with 9ft cord
DESIGN/APPLICATION DATA:
Designed to inactivate airborne pathogens susceptible to 254nm UV radiation at a high flow rate and in
safe conditions while people are present. The initial design was based on inactivating corona virus in a 30' x 30' x 10' room in less than
15 minutes. This unit can treat a 600 to 900 cubic feet per minute, inactivating at least 92% of SARS-COV-2 per pass with an active
shedder present. The M600 is designed for continued operation while occupants are in the room and maintains a significantly safer
environment than if not used.
NOTES:
1. The validity of the specification data is based on two independent university studies, discussed in the M600 white paper.
2. 3rd party verification studies have shown the M600 effective against airborne pathogens susceptible to 254nm UV
3. “Safer” from the risk of contracting coronavirus in an indoor space with no treatment.
4. This device falls within the 880.6500 Medical ultraviolet air purifier - Class II medical device category and is pending FDA approval.
5. Unit must be used as intended for maximum efficacy